DSC
| Vendor | Mettler – Toledo |
| Catalog name | DSC 1 Stare |
| Laboratory | TIPs |
Eau ultrapure
| Vendor | Sartorius |
| Catalog name | Arium Pro UV |
| Technical details | Conductivity =< 0,055 µS_cm |
| Laboratory | TIPs |
Microplate reader
| Vendor | VWR Thermo Scientific |
| Catalog name | Multiskan FC |
| Technical details | Plate types: 96 and 384-well plates; Shaker: linear shaking, 3 speeds: Slow (5Hz, Ø 15 mm), Medium (11 Hz, Ø 3 mm) and Fast (20 Hz, Ø 1 mm); Wavelength range: 340 to 850 nm; Wavelength accuracy: ± 2 nm |
| Laboratory | TIPs |
Spray dryer
| Vendor | Labplant |
| Catalog name | SD06AG |
| Laboratory | TIPs |
Autoclave, 5l inox + instrumentation
| Vendor | Autoclave France - Maxitech |
| Laboratory | TIPs |
Sechoir tunnel
| Laboratory | TIPs |
Systeme de scrubbing (spray setup)
| Laboratory | TIPs |
Vacuum chamber
| Vendor | Vacotec |
| Laboratory | TIPs |
Ember 3D Printer
| Vendor | Autodesk (Hurni) |
| Catalog name | Ember |
| Technical details | Digital Light Projection based stereolithographic printer. Horizontal resolution 50µm, vertical resolution +- 25µm. Maximum size: 64x40x134mm |
| Laboratory | TIPs |
Rotavap
| Vendor | Büchi |
| Laboratory | TIPs |
cryothermostat
| Vendor | Huber |
| Catalog name | CC-K25 |
| Technical details | cryothermostat -45 - 200°C |
| Laboratory | TIPs |
membrane pûmp
| Vendor | Prominent |
| Catalog name | Sigma 1 |
| Technical details | membrane pump 5l_hr |
| Laboratory | TIPS |
Densimetre
| Vendor | Anton Paar |
| Catalog name | DMA4500M |
| Laboratory | Tips |
viscosimetre
| Vendor | rheosense |
| Catalog name | mVROC-1 |
| Laboratory | Tips |
Makerbot 3D Printer
| Vendor | Makerbot |
| Catalog name | Replicator 5th Generation |
| Technical details | FDM printer, maximum size of 252 X 199 X 150 mm, layers from 0.1mm to 0.3mm, nozzle has a diameter of 0.4mm, filament of 1.75mm diameter, printing temperature up to 255°C. |
| Laboratory | TIPs |
Vacuum Centrifuge
| Vendor | Thermo-Scientific (VWR) |
| Catalog name | SpeedVac Concentrator SAVANT SC210A |
| Description | This custom made vacuum centrifuge can be used to encapsulate implants in a silicone rubber. The implant is placed in a mould in the work holder of the whirling arm of the rotor. The spinning of the rotor induces a force that initiates the insertion of the silicone inside the mould cavity. Simultaneously, the pressure is decreased in the vacuum centrifuge. High vacuum while centrifuging, allows to remove any voids in the silicone and ensuring the good adhesion of the silicone to the substrate. |
| Laboratory | BEAMS-AN |
Organ bath
| Vendor | Grant Radnoti |
| Catalog name | 170051G |
| Description | These systems provide a controlled environment for conducting isolated tissue studies without the influence of in vivo systemic variables. |
| Laboratory | BEAMS-AN |
BIOPAC supply
| Vendor | Biopac |
| Catalog name | MP150 |
| Description | MP150 data acquisition and analysis systems with AcqKnowledge software provide a flexible tool for life science research. Record multiple data channels with variable sample rates to maximize storage efficiency at speeds up to 400 kHz (aggregate). |
| Laboratory | BEAMS-AN |
Screen Printer
| Vendor | Aremco Products Inc |
| Catalog name | Accu-coat model 3230-BL |
| Description | This screen printer can be used to manufacture printed circuit board on any kind of substrate. It includes (1) the Bench Top Screen Printer (Accu-Coat Model 3230-BL with Pneumatic Controls, 9" x 9" Print Area) (2) a circuit positioning system (X-Y-Theta Stage w/ 360º Rotation and 2” X-Y Travel) and (3) a vacuum Manifold, 10" x 10" Universal. |
| Laboratory | BEAMS-AN |
Custom built Hele-shaw cell
| Vendor | VINK |
| Catalog name | N/A |
| Technical details | Custom built temperature cell, comprising temperature controlling lid and plexiglas cell. (64 x 34 x 0.3cm internal dimensions) |
| Description | Large size Hele-Shaw cells for up to 20cm field of view. Sample applications shown here: Schlieren |
| Laboratory | NLPCU-Glacio |
Custom built cooling lid
| Vendor | Malcourant mecanique |
| Catalog name | N/A |
| Technical details | Custom built cooling lid to attach to Hele-Shaw cell. Cooled alcohol flows through lid to control temperature. |
| Description | Cooling lid to obtain freezing in Hele-Shaw cells. Sample applications: Schlieren |
| Laboratory | NLPCU-Glacio |
Custom built Hele-shaw cell with Harp resistivity system
| Vendor | VINK and Malcourant Mecanique and MPI Hamburg |
| Catalog name | N/A |
| Technical details | Custom built temperature cell, comprising temperature controlling lid and plexiglas cell with grooves for thermistor and resistivity wires (70 x 40 x 0.3cm internal dimensions) |
| Description | Hele-Shaw cell allwing for additional resistivity measurements. Applications can be found here: Schlieren |
| Laboratory | NLPCU-Glacio |
Custom built prototype Hele-shaw cell with Harp resistivity system
| Vendor | VINK and Malcourant Mecanique and MPI Hamburg |
| Catalog name | N/A |
| Technical details | Custom built temperature cell, comprising temperature controlling lid and plexiglas cell with grooves for thermistor and intalled resistivity wires (30 x 40 x 0.3cm internal dimensions) |
| Description | Hele-Shaw cell allwing for additional resistivity measurements. Applications can be found here: Schlieren |
| Laboratory | NLPCU-Glacio |
Harp electronics (resistivity measurements)
| Vendor | MPI Hamburg |
| Catalog name | N/A |
| Technical details | Custom built resistivy measurement system, comprising electronics and cables for connection to wires in Harp cell |
| Description | Hele-Shaw cell allwing for additional resistivity measurements. Applications can be found here: Schlieren |
| Laboratory | NLPCU-Glacio |
Mini Hele-Shaw cell in plexiglas. 6cm square, 3 mm gap
| Vendor | VINK |
| Catalog name | N/A |
| Technical details | Test Hele-Shaw cells in plexiglas |
| Description | Smaller scale Hele-Shaw cell. Sample applications can be found here Schlieren |
| Laboratory | NLPCU-Glacio |
Spray-dryer
| Vendor | Buchi |
| Catalog name | Mini-Spray dryer B-290 |
| Laboratory | Pharma |
Lyophilizer
| Vendor | Chris |
| Catalog name | Epsilon 1-6D |
| Laboratory | Pharma |
High-pressure homogenizer
| Vendor | Avestin |
| Catalog name | Emulsiflex-C5 |
| Laboratory | Pharma |
High-shear mixer
| Vendor | Pro-C-epT |
| Catalog name | Mi-Pro |
| Laboratory | Pharma |
Differential scanning calorimetry
| Vendor | TA instrument |
| Catalog name | DSC Q2000 |
| Laboratory | Pharma |
Fused-depsition modeling 3D-printer
| Vendor | Makerbot |
| Catalog name | Replicator 2 |
| Laboratory | Pharma |
Pressure-assisted microsyringes 3D-printer
| Vendor | Hyrel |
| Catalog name | 30M base system |
| Laboratory | Pharma |
Fluid-bed coater
| Vendor | Lleal |
| Catalog name | SLFLL_3 type |
| Laboratory | Pharma |
Nanoscribe
| Vendor | Nanoscribe |
| Catalog name | Photonic Professional GT |
| Description | This 3D printer uses a focussed infrared beam to solidy voxels of 200nm size of resist. Sample applications can be found here: nanoscribe |
| Laboratory | BEAMS-PL, TIPs |
| Name | Technical Details | Team |
|---|---|---|
| DSC, Mettler – Toledo, DSC 1 Stare | TIPs | |
| Eau ultrapure, Sartorius, Arium Pro UV | Conductivity =< 0,055 µS_cm | TIPs |
| Microplate reader, VWR Thermo Scientific, Multiskan FC | Plate types: 96 and 384-well plates; Shaker: linear shaking, 3 speeds: Slow (5Hz, Ø 15 mm), Medium (11 Hz, Ø 3 mm) and Fast (20 Hz, Ø 1 mm); Wavelength range: 340 to 850 nm; Wavelength accuracy: ± 2 nm | TIPs |
| Spray dryer, Labplant, SD06AG | TIPs | |
| Autoclave, 5l inox + instrumentation, Autoclave France - Maxitech, | TIPs | |
| Sechoir tunnel, , | TIPs | |
| Systeme de scrubbing (spray setup), , | TIPs | |
| Vacuum chamber, Vacotec, | TIPs | |
| Ember 3D Printer, Autodesk (Hurni), Ember | Digital Light Projection based stereolithographic printer. Horizontal resolution 50µm, vertical resolution +- 25µm. Maximum size: 64x40x134mm | TIPs |
| Rotavap, Büchi, | TIPs | |
| cryothermostat, Huber, CC-K25 | cryothermostat -45 - 200°C | TIPs |
| membrane pûmp, Prominent, Sigma 1 | membrane pump 5l_hr | TIPS |
| Densimetre, Anton Paar, DMA4500M | Tips | |
| viscosimetre, rheosense, mVROC-1 | Tips | |
| Makerbot 3D Printer, Makerbot, Replicator 5th Generation | FDM printer, maximum size of 252 X 199 X 150 mm, layers from 0.1mm to 0.3mm, nozzle has a diameter of 0.4mm, filament of 1.75mm diameter, printing temperature up to 255°C. | TIPs |
| Vacuum Centrifuge, Thermo-Scientific (VWR), SpeedVac Concentrator SAVANT SC210A | BEAMS-AN | |
| Organ bath, Grant Radnoti, 170051G | BEAMS-AN | |
| BIOPAC supply, Biopac, MP150 | BEAMS-AN | |
| Screen Printer, Aremco Products Inc, Accu-coat model 3230-BL | BEAMS-AN | |
| Custom built Hele-shaw cell, VINK, N/A | Custom built temperature cell, comprising temperature controlling lid and plexiglas cell. (64 x 34 x 0.3cm internal dimensions) | NLPCU-Glacio |
| Custom built cooling lid, Malcourant mecanique, N/A | Custom built cooling lid to attach to Hele-Shaw cell. Cooled alcohol flows through lid to control temperature. | NLPCU-Glacio |
| Custom built Hele-shaw cell with Harp resistivity system, VINK and Malcourant Mecanique and MPI Hamburg, N/A | Custom built temperature cell, comprising temperature controlling lid and plexiglas cell with grooves for thermistor and resistivity wires (70 x 40 x 0.3cm internal dimensions) | NLPCU-Glacio |
| Custom built prototype Hele-shaw cell with Harp resistivity system, VINK and Malcourant Mecanique and MPI Hamburg, N/A | Custom built temperature cell, comprising temperature controlling lid and plexiglas cell with grooves for thermistor and intalled resistivity wires (30 x 40 x 0.3cm internal dimensions) | NLPCU-Glacio |
| Harp electronics (resistivity measurements), MPI Hamburg, N/A | Custom built resistivy measurement system, comprising electronics and cables for connection to wires in Harp cell | NLPCU-Glacio |
| Mini Hele-Shaw cell in plexiglas. 6cm square, 3 mm gap, VINK, N/A | Test Hele-Shaw cells in plexiglas | NLPCU-Glacio |
| Spray-dryer, Buchi, Mini-Spray dryer B-290 | Pharma | |
| Lyophilizer, Chris, Epsilon 1-6D | Pharma | |
| High-pressure homogenizer, Avestin, Emulsiflex-C5 | Pharma | |
| High-shear mixer, Pro-C-epT, Mi-Pro | Pharma | |
| Differential scanning calorimetry, TA instrument, DSC Q2000 | Pharma | |
| Fused-depsition modeling 3D-printer, Makerbot, Replicator 2 | Pharma | |
| Pressure-assisted microsyringes 3D-printer, Hyrel, 30M base system | Pharma | |
| Fluid-bed coater, Lleal, SLFLL_3 type | Pharma | |
| Nanoscribe, Nanoscribe, Photonic Professional GT | BEAMS-PL, TIPs |